PRODUCT LIST
|
YHD5070TXS
Applications
:
It takes the combination of scrubing and high-pressure cleaning, garbage collecting, sewage recycling, mode of hydraulic tilting unloading to clean the pavement.
It is the combination of road sweeper and road washer, it can finish sweeping, high-pressure cleaning and the collection of garbage and sewage.
- It takes the combination of scrubing and high-pressure cleaning, garbage collecting, sewage recycling, mode of hydraulic tilting unloading to clean the pavement.
It is the combination of road sweeper and road washer, it can finish sweeping, high-pressure cleaning and the collection of garbage and sewage.
- 1.Use chassis of Isuzu, the engine to the IV emission standards
2.Device: "four sets of sweeping + V of water jet plane (number of nozzle spray frame around the eight or higher) + suction nozzle structure" decorate a form.
3.Four sets of sweep (front plate can be individually controlled) + V high pressure of nozzle ( the nozzle around independent controlled) + suction nozzle structure, several kinds of operating modes: (1) plate + suction nozzle, realize the road cleaning and dust collection;(2) V suction nozzle, the nozzle high-pressure realize road surface cleaning and dust collection;(3) sweep plate + V suction nozzle, the nozzle high-pressure realize sweeping and dust collection of the road
4.Function: upper plane washing, low pressure flush and spray dust, etc. All can use it as a road sweeper , road washer ,road sprinkler and spray dust car
5.Intelligent control system , stops operation and starting operation, the suction nozzle lift down, left and right spray rod such as a homework device all controlled by a key, easy to operate.
6.High-pressure cleaning spray boom is consist of V type nozzle and sunction nozzle in spray rod, the distance between spray boom and ground is fixed，spay angle may be adjusted according to road conditions, do not change with the vehicle load, can ahieve stable and best cleaning effect, and left right spray rod driven by cylinder
7.Sewage discharge valve device, can be effective for sewage and sludge separation and to discharge the sewage alone at any time according to the situation of the sewage in the garbage box
8.Single point dredging device is equipped with various angles, applicable to pavement compaction silt and blind Angle of garbage removal
9.Dump bins: double oil cylinder unloading, equips with low pressure flow spray cleaning device, can rinse the bin quickly.
10.With the distance automatically adjust technology and pneumatic buffer sweeping brush, keep the contact force of the sweeping brush and the ground in a fixed value, sweeping brush contact with the ground remains the same , After sweeping brush wear, can automatically compensate, do not need to manually adjust, make sure to wash the sweep efficiency is not affected, Fresh water and wastewater bins used single overall SUS304 stainless steel, never rust
11.In conventional cleaning operations, can use the large capacity of water pressure dust through imbibition enhancement
12.Equipped with low pressure water system, the vehicle front with former sprinkler and the nozzle front has great washing pressure ,it can wash six lanes at the same time: should match side device and adjustable nozzle for arbitrary Angle
13.Must have a net tube strength anti-freezing device
14.Must have a variety of security alarm system: fresh tank low water, sewage bin high water level, operation tips, deputy engine water temperature, oil pressure, reverse tips, hydraulic oil leakage alarm, video monitoring, etc.
15.Left, right plate is equipped with lighting, convenient environment homework at night, monitor the condition of the sweep plate.
16.Sweeping around plate, the structure of the water spray system with functions of automatic obstacle avoidance protection and restoration
17.PLC programming, intelligent control system, electricity, liquid, gas centralized control, the driver can complete the operation of various kings of action in driving room
18.Advanced video monitoring system, dual video input, respectively real-time condition monitoring sweeping brush and along the tail, provide the comfort of vehicle steering
19.Advanced pumping system, which can realize linear suction gap adjustment, improve the efficiency of suction, adopt advanced technology for suspension at the same time, avoid the bad working condition of cause damage to the suction system, automatic suction systems, after work easy to manipulate
20.Fresh water and sewage box can be raised, facilitate garbage tilt and maintenance
YHD5070TXS
|
Vehicle Model And Vehicle Name |
YH5070TXS Road Washer |
Chassis Model |
Isuzu Brand QL1070A1KAY |
|
Engine Type |
4KH1-TCG40 |
Engine Power |
88 |
|
Engine Emissions |
2999 |
Engine Manufacturers |
Isuzu (chongqing) engine co., Ltd |
|
Overall Dimensions (length/width/height) |
6320x2010x2475 |
Case (length/width/height) |
4600x2000x1600 |
|
Total Mass (Kg) |
7300 |
Volume （cube） |
Water Tank Volume |
4.5 |
|
Garbage Bin Volume |
2.5 |
|
Kerb Mass (kg) |
5030 |
Rated Quality (kg) |
2140 |
|
Approach Angle/Departure Angle（°） |
24/18 |
Before Hanging/Suspension （mm） |
1015/1485 |
|
Wheelbase (mm) |
3815 |
Highest Speed(km/h) |
100 |
|
Number Of Shaft |
2 |
Spring Leaf Number |
8/6+5 |
|
Chassis Basis Standard |
GB18352.3-2005 IV |
Tire Size |
7.00-16 14PR,7.00R16 14PR |
|
Tyre Number |
6 |
Wheel Base Before/After The Wheel track |
1504 /1425 |
CASE
RELATED PRODUCTION
|
